ELECTRONIC INTEGRATED SYSTEMS MECHANIC (Title 32)

Department of the Air Force - Air National Guard Units Little Rock AFB, Arkansas Little Rock AFB, Arkansas

Company

Department of the Air Force - Air National Guard Units

Location

Little Rock AFB, Arkansas Little Rock AFB, Arkansas

Type

Full Time

Job Description

Summary

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.

This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (Title 32), Position Description Number D2240P01 and is part of the AR ANG 189 MAI SQ, National Guard.

NATIONAL GUARD MEMBERSHIP IS REQURED

Learn more about this agency

Requirements

Conditions of Employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.

Compatible military grade and assignment required prior to the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.

Military Grades: Enlisted

  • Minimum Military Grade: NLT E-4/SrA
  • Maximum Military Grade: NTE E-6/TSgt

Compatible Military Assignments: Selectee must be a member of the Arkansas Air National Guard and become compatible within Air Force Specialty Code (AFSC) 2A9X4 within 12 months of appointment.

IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position. Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor). Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.

ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION.

Qualifications

GENERAL EXPERIENCE:
Experience or training which demonstrates the applicant's knowledge to perform duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes. Ability to collect and analyze data effectively, efficiently, and accurately. Able to apply procedures and directives by reading and interpreting material. Ability to communicate clearly and effectively. Applicant must have a validated understanding of the basic principles and concepts of the occupational series and grade.

SPECIALIZED EXPERIENCE:
Experience or training demonstrating the ability to repair, overhaul, rebuild, align, and adjust complete multi-systems such as the electronics package in a highly automated aircraft where target acquisition and tracking, weapons control, aircraft attitude control, navigation, and other complex functions are performed by numerous systems which are extensively interconnected with data feedback loops. Applies comprehensive knowledge of all major units of the complete multisystem, i.e., how they function independently, how they are interfaced in the integrated subsystems, and how the subsystems interact to achieve operating specifications. Able to determine proper sequence of operations and start point in sequential operations in order to pinpoint areas of malfunction. Extensive practical knowledge of the theories and practices of electromagnetic propagation, electronic circuits, computer theory, hydraulic or pneumatic control and power systems, and many other areas covering a wide range of system applications. Broad knowledge of the interactions among a number of closely integrated complex systems. Knowledge of mathematics, including trigonometry, to calculate power relation ships, signal phasing, etc. Ability to interpret drawings for multisystem complexes such as the complete electronics package for an aircraft including numerous interconnections of signal paths both between and within individual subsystems of the multisystem complex. Ability to isolate malfunctions of complete multiple integrated systems consisting of closely interrelated fire control, bombing-navigation, flight control, countermeasures or similar systems and to determine the methods of repair where extremely complex relationships exist among numerous interconnected units and control circuits not only within the individual control systems but between them as well, requiring complete knowledge of all electronic, mechanical, and or optical systems and units. Performs on-equipment or off-equipment maintenance on one or more complete electronic integrated systems associated with the assigned aircraft, and/or maintenance on automatic flight control systems, instrument systems, inertial and radar navigation systems.

Education

DUTIES CONTINUED:

3. Troubleshoots operational malfunctions and analyzes system performance utilizing aircrew debrief data, Technical Orders, schematic and wiring diagrams, engineering drawings, data analysis, common and system-specific test equipment and built in system tests. Performs on and off-equipment maintenance on systems such as automatic flight control, instruments, communication, navigation, and inertial navigation. Coordinates back shop bench check (if applicable, completes testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units (SRUs). Uses a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, frequency counters, phase-angle voltmeters, optical alignment equipment, digital pitot-static testers, programming units and special purpose test analyzers. Tests and troubleshoots solid state electronic assemblies and subassemblies such as circuit cards, modules, rate generators, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read only memories, and various integrated circuits. Identifies faulty parts and repairs to level authorized. Reassembles unit after repair, performs alignment and makes shop checks.

4. Recommends methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. Conducts aircrew debriefing to determine the nature of system malfunctions. Documents all discrepancies and maintenance actions performed by inputting information into the electronic records information systems (i.e.: CAMS, IMDS, GO-81, REMIS). Recommends hardware and software changes. Submits change recommendations to Technical Orders. Requisitions supply assets and processes repairable assets in accordance with Standard Base Supply System requirements. Documents maintenance actions in aircraft forms and documents man-hour expenditures and maintenance actions in the maintenance computer system. Maintains Electronic Warfare (EW) (if applicable) and analysis equipment such as infrared/radar warning equipment, infrared/radar jamming equipment, chaff/flare dispensing systems, signal analysis equipment, recorders, direction finders, and special purpose test equipment. Accomplishes organizational and intermediate level modifications. Configures complex aircraft ECM equipment (if applicable) to meet critical mission requirements. Performs intricate component alignment and calibration to ensure proper system operation. Performs flight operational test, adjusts or replaces units or components as required. Conducts aircrew debriefings to analyze maintenance problems and determines the nature of required modifications.

5. May upload and download chaff/flare dispensers. This hazardous task may involve the inspection, storage and handling of explosive devices; to include flares, chaff, impulse cartridges and similar items. Conducts on-the-job training on assigned systems and related support equipment and tasks to include classroom instruction as necessary. Provides training to lower graded personnel concerned with the repair of integrated avionics systems. Provides training to newly assigned personnel regardless of grade level. Prepares for and participates in Aerospace Expeditionary Force (AEF) tasking, deployments and various inspections and exercises. Processes and accounts for due-in from maintenance (DIFM) supply assets. Ensures that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification.

6. May be required to perform additional duties such as structural fire-fighting, aircraft fire/crash/rescue duty, serve as a security guard, remove snow, load and handle munitions, launch/recover and service aircraft, operate heavy equipment, maintain facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. Complies with safety, fire, security, and housekeeping regulations.

7. Performs other duties as assigned.

Additional information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).

REQUIREMENTS/CONDITIONS OF EMPLOYMENT:

Males born after 31 December 1959 must be registered for Selective Service.
Federal employment suitability as determined by a background investigation.
May be required to successfully complete a probationary period.
Participation in direct deposit is mandatory.
Must be able to obtain/maintain appropriate security clearance

Read more
Apply Now

Date Posted

09/10/2024

Views

5

Back to Job Listings ❤️Add To Job List Company Info View Company Reviews
Positive
Subjectivity Score: 0.5

Similar Jobs

Customer Support Associate - Threshold Marketing Inc.

Views in the last 30 days - 0

The company is seeking a fulltime Customer Support Associate to join their growing team in Little Rock The role involves managing client relationships...

View Details

Recruiter - Apptegy

Views in the last 30 days - 0

Apptegy is a company that partners with school districts to improve communication elevate their brand and empower all roles within their organization ...

View Details

Network Engineer - Ascend Technologies

Views in the last 30 days - 0

Ascend Technologies is seeking a Network Engineer with at least 3 years of experience preferably at an MSP The role involves providing operational sup...

View Details

Barista - Sodexo

Views in the last 30 days - 0

Sodexo is seeking a parttime Barista for Winthrop University offering a pay range of 1100 to 1200 per hour The role involves creating quality beverage...

View Details

Travel Nurse RN - Cardiac Cath Lab - $2,106 per week - GetMed Staffing, Inc.

Views in the last 30 days - 0

GetMed Staffing Inc is currently seeking a travel nurse RN with Cardiac Cath Lab experience for a 13week assignment in Round Rock Texas The job requir...

View Details

Production Cook - Sodexo

Views in the last 30 days - 0

Sodexo is seeking a fulltime Production Cook at the University of Arkansas at Little Rock The role involves preparing and creating nutritious dishes e...

View Details